Is a well established manufacturing company design double locking tee bar for GREEN CYCLE VISION Suspension
Ceiling Tee System. It consists of easy and solid interlocking Small Tee or Cross Tee, Main Tee and Wall Angle.
All Components of system are made of prepainted galvanized iron body to give acoustics and aesthetic beauty for
the exposed ceiling. The section are roll formed from hot dipped galvanized iron with both ends havingsplice for easy
interlocking purpose. The exposed flange is top with prepainted of standard white color and variety colors also available as
standard finished.

 

COMPONENT DETAILS

MAIN TEE
a – 6.0 ± 0.2
b – 8.0
c – 32.7 ± 0.5
d – 24.0 ± 0.5
CROSS TEE
a – 5.0 ± 0.2
b – 3.6
c – 25.6 ± 0.5
d – 24.0 ± 0.5

 

SMALL TEE
a – 24.0 ± 0.2
b – 24.0 ± 0.2
WALL ANGLE
a – 5.0 ± 0.2
b – 3.6
c – 25.6 ± 0.5
d – 24.0 ± 0.5

 

 

Description Finishing Quantity Per Ctn Length
Metric System Imperial System
Small Tee White Coated 90Pcs 600mm 2 feet
Cross Tee White Coated 90Pcs 1200mm 4 feet
Main Tee White Coated 25Pcs 3600mm 12 feet
Wall Angle White Coated 50Pcs 3048mm 10 feet
Wall Angle White Coated 50Pcs 3600mm 12 feet

 

Wall Angle

L-shaped moulding that supports and finishes the ceiling around its perimeter

Main Tees

The primary support for the ceiling system, main tees run the length of the room suspended from the joists by wire hangers.

Cross Tees & Small Tee

Cross tees are the supports that connect the main tees in a grid pattern to receive the ceiling panels.

They are available in two lengths:

a. Cross tees – Used for 2feet x 4feet ceiling panels

b.Small tees – Used for 2feet x 2feet ceiling panels

 

 

ADVANTAGES

  1. It is easy and required less manpower to install at minimum time within close proximity of the overheads.
  2. It is economical because of the interchange ability of Main Tees and Cross Tees.
  3. The system is flexible and capable of supporting load of heavy ceiling board.
  4. The ends of Tee System provide complete flush joint , eliminating gaps and ensure rigidity at fixtures.
  5. The Small Tee ,Cross Tee and Main Tee provides double lock action .
  6. Main Tee and Cross Tee splices require no tools to lock in and provide tight joint.
  7. Assured of minimum wastage and mistakes.
  8. It meets local fire code.
  9. Carefully packed in strong carton boxes.

 

 

 

INSTALLATION PROCEDURES

  1. The Aatomo Ceiling Suspension System shall be installers in accordance with the recommendations of ASTM C636 and the deflection of any component shall not exceed 1/360 of the span.
  2. Level the ceiling height with the use of a water lever and a length of string to square off.
  3. Wall angle should be mechanically fixed at every 450mm centers.Use screw, stud nails or drywall fasteners depending on the nature of the wall materials.
  4. The center-to-center distance for Main runners and Cross tees should be 600mm x 200mm for light duty or 600mm x 600mm for intermediate duty.
  5. Maximum distance between hangers is 1200mm. From wall to first hanger the maximum distance is 400mm.
  6. Main runners are spliced together by inserting a tap on section end into a slot in the adjoining section.
  7. Cross tees are inserted in the Main runners and locked in position by applying slight straight push-in-pressure.
  8. Adjust the profiles when completed to ensure they are evenly lever and squared.
  9. Hold Down clips are optional item and shall be provided upon request.